Skip to content

Vandermill-Audio

A DIY journey into audio

Vandermill-Audio

  • DIY-Line Arrays
  • Processing
  • Amplification
  • DIY-Subwoofers
  • News

Author: admin

News Processing 

Adding Passive Filters

5th January 20225th January 2022 admin

August 2021 Over the course of the last year I have added passive filtering to the array. It’s prime function

Read more
Processing 

JRiver Media Center

10th May 202011th May 2020 admin

I’m not affiliated with JRiver in any way, however I must dedicate a few lines to this wonderful software. While

Read more
Processing 

Room EQ Wizzard

10th May 202011th May 2020 admin

As another indispensable part of my journey, I mainly use REW as my measurement suite. There are several other options

Read more
Processing 

DRC-FIR software

9th May 20204th September 2022 admin

To equalize my arrays I’ve made use of the free software package DRC-FIR written by Denis Sbragion. To learn this

Read more
Amplification 

My reference amplifier

8th April 202010th January 2022 admin

Our get together with the listening session, listening to several amplifiers within my system, changed my world. Never again will

Read more
Amplification 

My ambience amplifier

8th April 202010th May 2020 admin

For added ambience, basically hiding the actual (small) size of my room, I use this amplifier. That duty was formerly

Read more
Building the Subwoofers 

Build your own subwoofers

5th April 202027th April 2020 admin

As I’ve already build my set of subwoofers, to help out my arrays with the bottom end extension, I might

Read more
Building the Subwoofers 

Scan Speak Discovery 30W/4558T00

5th April 202027th April 2020 admin

Choosing a woofer for this project to fit my needs made me look at the Scan Speak 30W. I needed

Read more
Building the Subwoofers 

Designing the enclosure

5th April 20209th May 2020 admin

Even though the outer dimensions were pretty much fixed at 40 x 40 x 40 cm, I wanted to create

Read more
Building the Subwoofers 

Front baffle design

5th April 202027th April 2020 admin

On to the separate parts, let’s start with the front baffle. This baffle consists of 2 pieces of Birch ply.

Read more
  • ← Previous
  • DIY-Subwoofers

    DIY-Subwoofers

    While the goal of building the arrays was …
  • Build your own subwoofers

    Build your own subwoofers

    As I’ve already build my set of subwoofers, …
  • Scan Speak Discovery 30W/4558T00

    Scan Speak Discovery 30W/4558T00

    Choosing a woofer for this project to fit …
  • Designing the enclosure

    Designing the enclosure

    Even though the outer dimensions were pretty much …
  • Driver baffle & Back Baffle

    Driver baffle & Back Baffle

    First up, the inner baffle that the driver …
  • Brace and Side Panels

    Brace and Side Panels

    The brace is kept as simple as possible. …
  • Top and Bottom panels

    Top and Bottom panels

    Starting with the top panel, made of 19mm …
  • Final parts and Assembly

    Final parts and Assembly

    Just a few parts to go, a few …
  • Making it an Active-Subwoofer

    Making it an Active-Subwoofer

    To power the subwoofers I used the Hypex …
  • Impedance measurement

    Impedance measurement

    Blue line: Woofer in free air. Red line: …
  • Preliminary results

    Preliminary results

    The graph above is taken at the listening …
Copyright © 2023 Vandermill-Audio. All rights reserved.
Theme: ColorMag by ThemeGrill. Powered by WordPress.