DIY-Subwoofers
While the goal of building the arrays was to have a system that can do it all, from the lowest
Read moreDesigning and building subwoofers
While the goal of building the arrays was to have a system that can do it all, from the lowest
Read moreAs I’ve already build my set of subwoofers, to help out my arrays with the bottom end extension, I might
Read moreChoosing a woofer for this project to fit my needs made me look at the Scan Speak 30W. I needed
Read moreEven though the outer dimensions were pretty much fixed at 40 x 40 x 40 cm, I wanted to create
Read moreOn to the separate parts, let’s start with the front baffle. This baffle consists of 2 pieces of Birch ply.
Read moreFirst up, the inner baffle that the driver bolts on to. Baltic Birch ply, 19mm. Same hole pattern as the
Read moreThe brace is kept as simple as possible. It makes the enclosure more rigid and will move panel resonances up
Read moreStarting with the top panel, made of 19mm baltic birch. The bottom panel is exactly alike, except for the few
Read moreJust a few parts to go, a few braces (4 of each) that are put in the corners of the
Read moreTo power the subwoofers I used the Hypex NC500MP module. It is a nice, compact and efficient 500 watt into
Read more