Skip to content

Vandermill-Audio

A DIY journey into audio

Vandermill-Audio

  • DIY-Line Arrays
  • Processing
  • Amplification
  • DIY-Subwoofers
  • News

Building the Subwoofers

Designing and building subwoofers

Building the Subwoofers 

Impedance measurement

5th April 202028th April 2020 admin

Blue line: Woofer in free air. Red line: Woofer in enclosure. Green line: Woofer in the damped enclosure. The smoother

Read more
Building the Subwoofers 

Preliminary results

5th April 202027th April 2020 admin

The graph above is taken at the listening spot after a measurement session aligning the subwoofers with the line arrays.

Read more
  • Next →
  • DIY-Subwoofers

    DIY-Subwoofers

    While the goal of building the arrays was …
  • Build your own subwoofers

    Build your own subwoofers

    As I’ve already build my set of subwoofers, …
  • Scan Speak Discovery 30W/4558T00

    Scan Speak Discovery 30W/4558T00

    Choosing a woofer for this project to fit …
  • Designing the enclosure

    Designing the enclosure

    Even though the outer dimensions were pretty much …
  • Front baffle design

    Front baffle design

    On to the separate parts, let’s start with …
  • Driver baffle & Back Baffle

    Driver baffle & Back Baffle

    First up, the inner baffle that the driver …
  • Brace and Side Panels

    Brace and Side Panels

    The brace is kept as simple as possible. …
  • Top and Bottom panels

    Top and Bottom panels

    Starting with the top panel, made of 19mm …
  • Final parts and Assembly

    Final parts and Assembly

    Just a few parts to go, a few …
  • Making it an Active-Subwoofer

    Making it an Active-Subwoofer

    To power the subwoofers I used the Hypex …
  • Impedance measurement

    Impedance measurement

    Blue line: Woofer in free air. Red line: …
Copyright © 2023 Vandermill-Audio. All rights reserved.
Theme: ColorMag by ThemeGrill. Powered by WordPress.